If there’s one thing that can ruin a perfectly good weekend, it’s a broken DVD player. It can be really frustrating to see the No Disc error when you’ve been looking forward to watching the new blockbuster.
But worry not. A lot of the times, problems with the player can be fixed in a few simple steps. You could have a scratched DVD or a dirty lens on the player, or you could also be having problems with the screen of the player.
In this article, we’ll tell you how to fix a portable DVD player and solve some of the most common problems you may encounter when playing your DVD player. So, let’s get started with our detailed step-by-step guide.
Step 1: Reinsert the DVD Disc
To make sure that the DVD is placed correctly, press the eject or open button. If the disc is placed correctly, the tray should come out smoothly. But if it’s coming out slower than usual, then pull out the tray using your hands.
You can also try inserting a paperclip or a pin into the small manual eject hole. Once the tray is out, seat the disc again onto the tray and close it. Then, press Play to see if it’s corrected.
Step 2: Clean the Disc
Sometimes it’s not the player but the DVD disc that’s creating the problem. It’s possible that dust has accumulated on the disc, and the lens on the player can’t read from the disc.
Simply take the disc and wipe it with a clean, lint-free piece of cloth. You can use water or denatured alcohol to better clear away dust or smudges. And you can also try putting in a different DVD to check if it’s actually the player that has the problem or the disc itself.
Step 3: Clean Scratches on the Disc
If you’ve borrowed your DVD from the library or a rental store, it’s possible that it has scratches from being overused. Your video might be stuttering or freezing in the middle of a scene. For that, you need a clean cloth and some toothpaste.
Wipe the disc with the dry lint-free piece of cloth first to remove any loose dirt. Put some toothpaste on the cloth and gently rub the scratched areas of the disc with it. Start from the center and make your way towards the edge.
Wash off the toothpaste under running water while wiping with a cloth. Dry the disc with a dry cloth, but be careful as the dry disc is more prone to getting scratches than a wet one.
Put the disc back into the player and press Play to check if the problem is resolved.
Step 4: Reset the Player
Sometimes the firmware of the player can malfunction and restrict the player from reading the disc properly. Fear not. It can almost always be fixed by resetting the DVD player. Just power off the player and turn it back on, then play normally.
Step 5: Check Battery
If you’re having problems with turning on the player, there might be something wrong with the battery. It could be that the battery charge is low or it’s dead. What you have to do is plug in your DVD player to a power source by connecting it to a wall socket with an electric cable.
And if it solves the problem, you need to get a new battery for your player. But until you get one, you can use the player by connecting it to a power source.
Step 6: Picture Settings
Another common problem is when the picture seems unstable or squished. If this is the case, then you might need to check the dimensions of the movie and your settings in the player.
For example, you could be playing a widescreen movie while your player is set to play at a regular dimension. In this case, your DVD player will squash the picture. If it’s the other way round, then the player will stretch the picture while playing.
All you have to do is change the settings, and you’re good to go.
Step 7: Reconnect Base to Screen
If you’re hearing the movie but can’t see anything, then maybe there’s a problem with the connection between the base and the screen. Check the back of the player, and you’ll see a wire. Remove it, then replace it and make sure that it’s connected properly.
Step 8: Cleaning the Player’s Laser Lens
A lot of the times, when DVD players cannot read discs even when there’s nothing wrong with the disc itself, it’s because the laser lens might be dirty. First, turn off the player and disconnect any wires attached to it. Open the disc tray gently with your hands or by inserting a pin into the manual eject hole.
You can use a compressed air container to clean the tray and the inner area. Only use small bursts of air to make sure there is no dust or debris on the laser lens. And you can also clean the lens using a q-tip and some isopropyl alcohol.
Step 9: Visit the Website
If you’re still stuck in understanding how to fix a portable DVD player, you can go to the website of the manufacturer of your DVD player and check their troubleshooting section where you can get more ideas on how to solve your problem.
These simple and easy steps will fix most of your problems with the player. If, however, you’re still facing problems, then consider taking a trip to the store.
But we’re almost certain that our solutions will work wonders on your DVD player, and you can resume your movie in a jiffy.